Skip to main content
USA Home Repairs

Interior & Exterior Painting in Arlington, TX

Arlington sits in North Texas's severe-weather corridor, where long summers routinely push past 100°F with high humidity and spring brings hail and straight-line winds. That combination is hard on paint: UV bakes color out of sun-facing walls, humidity feeds mildew on shaded siding and soffits, and wind-driven rain finds any caulk joint that has let go around trim and window frames.

USA Home Repairs dispatches technicians in the Arlington area for exterior repainting of siding, stucco, trim, soffits and fascia, along with interior walls, ceilings, trim, doors and cabinet refinishing. Our phones are answered 24/7 at (888) 996-7488, scheduling is same-day or next-day in most areas, and you get a free estimate before any work starts.

Phones answered 24/7

Book painting service

We answer around the clock. Tell us your ZIP and what's going on — you'll get the earliest window in Arlington and a specialist on the way.

(888) 996-7488

Tap to call · 24/7 live answering — call anytime

  • Free estimate on every service
  • Same-day & next-day appointments
  • Workmanship guarantee
Arlington specifics

Why house painting is different in Arlington

Census ACS 5-year (2022) figures put Arlington's median year built at 1984, so a large share of the city's roughly 398,000 residents live in homes that are now around four decades old — brick-veneer ranch and two-story houses on slab-on-grade foundations where the painted surfaces are wood trim, soffits, fascia and garage door frames rather than the brick itself. North Texas expansive clay swells with soaking spring rains and shrinks in summer drought, racking openings and opening hairline gaps at trim joints that let moisture behind the paint film. Homes in the older 1960s and 1970s pockets of Arlington may predate 1978, which brings federal lead-paint rules into play any time old coatings are disturbed.

Problems we fix in Arlington

  • Peeling on sun-facing walls

    Arlington summers combine intense UV with 100°F-plus heat, which chalks and fades south- and west-facing elevations faster than shaded sides. Painting over a chalky surface without washing and priming leads to a coat that releases within a season or two.

  • Failed caulk at trim and windows

    Wide swings between hard winter freezes and baked summers expand and contract trim joints until the caulk splits. Once that happens, wind-driven rain from spring storms gets behind the paint and into the window frame.

  • Mildew on shaded siding and soffits

    The humid subtropical climate keeps north-facing walls and deep soffit overhangs damp, and mildew will grow straight back through fresh paint if it is not killed and cleaned first.

  • Moisture pushing paint off from behind

    Blistering that shows up in one patch rather than across a whole wall usually means water is getting in somewhere — a flashing gap, a failed joint, or splash-back near the slab. The leak has to be addressed before repainting makes sense.

  • Storm and hail damage to painted surfaces

    Hail is North Texas's defining property-damage event, and a spring storm can chip trim, fascia and garage door panels across a whole subdivision at once. Exposed substrate left bare through a Texas summer deteriorates quickly.

  • Cracks and nail pops inside

    Clay-soil movement under slab foundations shows up indoors as drywall cracks at corners, over doorways and along ceiling seams on 1970s-1990s homes. Painting over them without proper surface repair just hides the line for a few months.

  • Lead paint in older homes

    Arlington's older housing from the 1960s and 1970s can carry pre-1978 coatings, and federal rules govern how those surfaces are disturbed. Sanding or scraping without the right approach spreads dust through the house.

What we do

Exterior repainting

Siding, stucco, trim, soffits and fascia, prepped for North Texas sun and humidity with washing, scraping and priming before topcoats go on.

Interior walls, ceilings, trim and doors

Full-room or whole-house interior work, including the trim and door repainting that gets scuffed in a house with an attached two-car garage as the main entrance.

Drywall and surface repair

Patching cracks, nail pops and damaged drywall from foundation movement or water intrusion so the new finish sits on sound material.

Caulking and priming

Re-caulking trim, window perimeters and siding joints, then spot- or full-priming, which is the step that decides how long an Arlington exterior holds up.

Cabinet refinishing

Kitchen and bath cabinet refinishing for 1980s and 1990s homes where the boxes are solid but the finish is dated or worn.

Color matching and HOA schemes

Matching existing colors or working to an approved palette for the master-planned subdivisions in north and far south Arlington, where HOAs commonly set exterior color rules.

Licensing, permits and codes in Texas

Texas has no statewide general contractor or home improvement contractor license, and painting is generally not a TDLR-licensed trade; the Texas Department of Licensing and Regulation licenses trades such as electricians and air conditioning contractors, while plumbing falls under the Texas State Board of Plumbing Examiners. If a repaint involves anything beyond coatings — electrical, gas or plumbing work tied into the project — that portion should be handled under the appropriate license, and you can verify current requirements with TDLR. Homes built before 1978 fall under federal lead-paint rules when painted surfaces are disturbed. Permit and HOA approval questions for exterior color changes should be verified with the City of Arlington and your HOA.

Timing and availability

Demand across Arlington spikes from March through June when hail and wind storms hit, so exterior repaints often follow storm repairs — and bare wood left exposed through a 100°F summer will not improve on its own. Late summer heat and the first hard freeze of winter are both hard on caulk joints and exterior trim, which makes fall and early spring comfortable windows for exterior work, while interior rooms and cabinets can be scheduled any time of year. Call (888) 996-7488 whenever it suits you; our phones are answered 24/7 and technicians in the Arlington area can usually be scheduled same-day or next-day, with a free estimate before any work begins.

We schedule painting work across Downtown Arlington, the Entertainment District, the College Park District and UTA area, Interlochen, Viridian, Lake Arlington, Randol Mill, North, South and East Arlington, Pantego and Dalworthington Gardens, plus nearby Grand Prairie, Mansfield, Kennedale, Fort Worth, Euless, Irving, Cedar Hill and Dallas.

FAQ

Painting questions in Arlington

How long will exterior paint last in Arlington's climate?

It depends heavily on exposure and prep. South- and west-facing walls take the brunt of long 100°F-plus summers and UV, so they chalk and fade first, while shaded north elevations tend to fail from mildew instead. Washing, scraping and priming before topcoats makes more difference here than the number of coats.

My house was built in the early 1980s — is lead paint a concern?

The median Arlington home dates to 1984 per Census ACS 5-year (2022) data, so many houses are just past the 1978 cutoff. Older homes in the 1960s and 1970s pockets of the city are more likely to have pre-1978 coatings, and federal rules apply when those surfaces are disturbed. If you are unsure of the build year, say so when you call.

Can you repaint damaged trim and fascia after a hail storm?

Yes. Spring hail and straight-line winds in North Texas can chip trim, fascia and garage door panels across an entire subdivision. We handle surface repair, caulking, priming and repainting; any structural or roofing component that needs replacing should be addressed before the finish coats go on.

Will you work with my HOA's approved colors?

Yes. Newer master-planned subdivisions in north and far south Arlington commonly carry HOAs with exterior color rules. Bring us the approved scheme or the existing color and we will match to it — confirming approval with your HOA stays with you as the homeowner.

Why does the paint keep peeling in the same spot?

Repeat peeling in one area usually means moisture is reaching the back of the paint film, often through a failed caulk joint, flashing gap or splash-back near a slab foundation. Arlington's clay soil movement can also open trim joints seasonally. The source has to be corrected first, or the new coat will lift the same way.

Need painting help in Arlington today?

Free estimate. Phones answered 24/7. Call for the earliest window in your area.

(888) 996-7488
Call (888) 996-7488 · Free estimate